Brass Misting Nozzles 20-Pack 1/2-Inch Adjustable Atomizer Nozzles for Dust Removal and Evaporative Cooling on Lawn Garden 80-150 kPa 0.3-1.2 m3/h 2.0-5.5 m Spray Diameter

BQCYDE misting nozzles integrate into low-pressure outdoor water systems to provide localized dust suppression and evaporative cooling for work and leisure spaces. Installations typically run along pergolas, scaffolding rails, greenhouse benches, or exterior shade structures to create a controlled fine-water atmosphere that reduces airborne particulate and lowers ambient temperature in the immediate zone.Specifications:Item type: Brass misting nozzlesMaterial: BrassConnection size: 1/2-inch inner threadOperating pressure: 80-150 kPaWater flow: 0.3-1.2 m3/h per nozzleSpray diameter: Approx. 2.0-5.5 m (6.6-18 ft)Gross weight: 425 g (15.0 oz)Package Included:20 x Brass misting nozzlesQ: Are these nozzles compatible with my existing 1/2-inch line?A: Yes, each nozzle uses a 1/2-inch internal thread intended to mate with standard 1/2-inch hose or manifold fittings; use PTFE tape for a reliable seal.Q: What water quality is required?A: Use filtered clean water to minimize clogging; inline sediment filters are recommended for systems drawing from open or untreated sources.Q: Can these be used for chemical sprays or additives?A: No, the product is designed for water-based misting; avoid chlorinated or chemically aggressive solutions that can accelerate wear or impair sealing.Q: How do I clear a clogged tip in the field?A: Perform system shutdown, remove the tip if accessible, flush with clean water and use a fine clearing tool or soft brush; reassemble and test at low pressure.Q: What installation torque is recommended?A: Hand-tight plus a quarter-turn with a wrench is sufficient; avoid excessive torque that can damage threads or deform the fitting.

• [Material and Resistance] Solid brass construction with precision machining and - surfaces supports dimensional stability under typical outdoor exposure; compatible with 1/2-inch internal thread fittings and rated for 80–150 kPa operating pressure; designed to produce a fine water mist for particulate suppression; use filtered clean water only and avoid abrasive or chemical fluids.
• [Adjustable Flow and Spray Control] Threaded adjustable tip allows gradual change from low-volume fog to denser mist with flow range approximately 0.3–1.2 m3/h at specified pressures; enables targeted reduction of airborne dust and localized evaporative cooling for work and leisure areas; not designed for viscous liquids or continuous submersion.
• [Coverage and Typical Applications] Each unit yields an effective spray diameter of about 2.0–5.5 m (6.6–18 ft) depending on system pressure and placement; suitable for construction dust control lines, greenhouse humidity management, patio and pergola misting, and livestock area comfort; placement density and wind conditions will affect actual coverage.
• [Installation Compatibility and Fastening] 1/2-inch inner-thread interface fits common 1/2-inch hose and manifold systems for straightforward twist-in installation; PTFE tape is recommended to ensure leak-free joints; compatible with low-pressure pump setups within the stated kPa range; avoid overtightening beyond hand-plus-quarter-turn torque to prevent thread damage.
• [Maintenance Serviceability and Durability] Units are serviceable with routine flushing and tip clearing to reduce clogging risk; brass body resists deformation and common outdoor factors for extended service life; replacement-tip access allows field servicing and seal inspection; use inline sediment filtering to extend operating intervals.