440 * 210mm 150W Precision Mini Metal Lathe With 50mm Chuck, Maximum Processing Length 125mm, 3800RPM Stepless Speed Change, For Teaching Experiments, Manual Home DIY Various Metal Milling

Mini metal lathe: The milling machine is made of rigid cast iron, which is a strong material with a long service life. It is designed with buttons and knobs for easy use.Variable speed: The metal lathe has a variable speed of 100-3800. The speed can be easily changed by just turning the switch. At the same time, the indicator above will inform you of the being performed.Three-jaw chuck: The mini lathe comes with a 50mm three-jaw chuck and a 10mm spindle hole, which is widely used where precision machining is required and high rotation speeds are achieved.4-way tool holder: The 4-way tool holder on the lathe is easy to adjust. It is also convenient to change the tool. With the tool holder, you can make bevel cuts.Stable : The lathe has a center support and a tailstock to support the longitudinal rotation axis of the workpiece you want to machine.Wide application: The metal lathe does not take up much space in your shop or garage when working, and can make bushings, spindles, prototypes, models, etc.Material: Made of high-quality HT200 cast ironProduct parameters:Lathe dimensions (length x width x height): 440*270*210 mmPower: 150WVoltage: 220VWorkpiece rotation diameter on lathe: 110mmMaximum working length: 125mmSpindle through hole diameter: 10mmTail shaft aperture: 10mmTail shaft thread: M14*1 mmSlide plate horizontal stroke: 50mmSpindle speed range (stepless speed regulation): 100-3800±10%rpm

• Product parameters: Lathe dimensions (length x width x height): 440*270*210 mm, power 150W, voltage 220V, workpiece rotation diameter on the lathe 110mm, maximum working length 125mm, spindle through hole diameter 10mm, tail shaft aperture 10mm, tail shaft thread M14*1mm, drag plate lateral stroke 50mm, spindle speed range (stepless speed regulation) 100-3800±10%rpm.
• Material: The mini lathe is made of high-quality HT200 cast iron, which is sturdy and stable. The machine tool adopts double-sided sheet material, KB material grade A, and strengthens the power supply system + custom capacitor and alloy inductor design. The machine tool adopts a variable speed spindle and touch switch panel. This lathe allows you to move forward or backward at any possible speed. The feed speed can be adjusted manually or automatically. And there is an emergency button
• Safety protection: The machine tool is specially equipped with a high-safety automatic power cut-off chuck guard device, and the tool holder is equipped with a guard to increase your safety while working. The small metal lathe is equipped with a turret column for quick tool changes and a center stand to firmly hold the workpiece, allowing for internal cutting, end cutting, and bevel cutting.
• Precise Work: Spindle bore: 0.39"/10 mm. The metalworking lathe comes pre-installed with a 1.97"/50 mm diameter three-jaw chuck to tightly clamp the material, and a splash guard to prevent metal chips.
• Wide Application: The lathe can perform precision machining without taking up a lot of space in your workshop or garage, and can make bushings, spindles, prototypes, models, and more.